Sakai Kikumori Choyo 240mm Gyuto Shirogami 2 With Saya

Sakai Kikumori ‘Choyo’ 240mm Gyuto. Double bevel shirogami #2 core with mirror polish iron cladding. Octagonal magnolia wood and water buffalo ferrule handle. Comes with saya.

The double bevel knives from this series cut nearly effortlessly but still have an authoritative solid feel. However, these knives are ground very thin behind the edge and will not tolerate mistreatment.

Shirogami #2 is very responsive to sharpening stones, taking an extremely fine but biting edge easily. It is a highly reactive carbon steel.

Choyo series knives represent some of the best of Sakai’s knife making. They are made by craftspeople who are highly respected for preserving demanding traditional techniques while contributing their own refinements and creativity to the trade.

Choyo Shirogami 2 knives are forged by Tanaka Hamono. Tanaka-san’s top level forging and heat treatments make for unusually easy sharpening, superb edge life and toughness.

Choyo grinder and polisher is Morihiro Hamono. Morihiro-san’s grinding is superb; he pioneered this low kiriba grind on wa-gyuto. The characteristic result of this grinding and polishing are the even, wide bevels, chamfered spine and brilliant mirror polish.

Sakai Kikumori was started in 1926 and draws on Sakai’s 600 year history as the major center of traditional Japanese cutlery manufacturing. They work with a large variety of Sakai’s best smiths, sharpeners and small factories to offer a wide variety of knives ranging from traditional to modern.

This knife has a hard carbon steel core with iron cladding for added durability. The entire blade will develop a patina with use, and especially so with acidic foods. Special attention is needed to keep from rusting. Hand wash and dry before storing. Do not leave wet and do not use a dishwasher. Rust can be removed with a light abrasive.

Hardwood-end grain or softwood long grain cutting boards are preferred. Avoid bamboo and plastic cutting boards.

Brand: Sakai Kikumori
Smith: Tanaka Hamono
Producing Area: Sakai
Profile: Gyuto
Size: 240mm
Steel Type: Iron Clad Carbon Core
Steel: Shirogami 2
Handle: Magnolia with Buffalo Horn Ferrule
Total Length: 379mm
Edge Length: 225mm
Handle to Tip Length: 243mm
Blade Height: 50mm
Thickness: 2.18mm
Handle Length: 134mm
Weight: 160g
Hand Orientation: Ambidextrous
Sharpener: Morihiro Hamono

Steel Type	Shirogami 2
Handle Material	Octagon magnolia wood & water buffalo ferrule
Weight	168.1 grams
Height at Heel	50 mm
Overall Length	379mm
Cutting Edge Length	223mm
Thickness	2.5 mm
HRC	60-61

*Actual weights and measurements may vary piece to piece

These knives come from the maker with lacquer on the blade for corrosion protection during shipping. It can be removed using acetone or lacquer thinner (follow manufacturers instructions for use).

If you would like us to remove it prior to shipping, enter “Please remove lacquer” in the +Special Instructions on the Cart page. This could delay shipping by up to 5 days.